BeadBlaster™ 24 Microtube Homogenizer (Benchmark Scientific)
- Fast, efficient homogenization in about 35 seconds
- For all sample types, from soft tissue to bone
- Mix up to 24 tubes simultaneously
- Sealed 2.0 mL tubes - eliminates cross contamination
The BeadBlaster™ 24 completely lyses, grinds and homogenizes a broad variety of biological samples. Even the most difficult and resistant samples are fully homogenized, often in 35 seconds or less.
The stainless steel tube carrier subjects up to 24 samples to an optimized, high speed, 3D motion, producing high energy impacts between the samples and micro-beads to release cellular contents. After homogenization, samples can be centrifuged and the supernatant collected for further processing.
Operating parameters for the BeadBlaster 24 are set and displayed digitally. To protect fragile, heat sensitive samples, the unit can be programmed to operate in shortened consecutive cycles with a rest period in between. Up to 50 such programs can be stored in memory and recalled for future use.
| Speed Range: | 4.0 to 7.0 m/s (0.05 m/s increments) |
| Capacity: | 24 x 2.0 mL |
| Cycle Time: | 1 to 90 sec. (up to 90 sec.) |
| Pause Between Cycles: | 0 to 2 min. (1 sec. increments) |
| Max, Cycles per Program: | 10 |
| Program Memory: | up to 50 |
| Accel. / Decel. Time: | <2 sec. / <2 sec. |
| Noise Level: | <68 db |
| Dimensions: | 11” W x 14.2” D x 15.2” H |
| Weight: | 55 lbs |
| Electrical: | 115V with US Plug, 50-60Hz |
| Warranty: | 2 Years |
| Item No. | Mfr. Item No. | Unit of Measure | Your Cost | Purchase |
|---|---|---|---|---|
|
BeadBlaster™ 24 Microtube Homogenizer
4162-65
|
D2400 | Each |
$8,912.79
|