PMP Acidity Titratable Tester - The Glass Alternative
Non-glass components feature Nalgene® plastic (PMP) buret and flask. The buret is supplied with stopcock and is graduated with a scale that corresponds to the 1% full scale as found on the glass Kimax® acidity buret, therefore, each mL corresponds to 0.1% titratable acidity. The complete outfit consists of one buret, filling tube assembly with Tygon® tubing, 2-holed stopper, rubber bulb with 4” of tubing and a clamp. Simple assembly is required.
The buret is self-zeroing, crystal clear, durable and meets ASTM E287. Capacity is 10 mL with 0.1mL subdivisions and a tolerance of ±0.04 mL. The flask holds 1000 mL.
Replacement Rubber Bulb (Item No. 3010-03) With two valves, control vent and four inches of tubing.Link
Replacement Rubber Tubing (Item No. 3010-06) Pure gum, black latex. For use with Acidity Titratable Tester. Per foot.Link
Replacement Tygon Tubing (Item No. 3010-05) Tygon tubing 5/16" OD X 3/16" ID. Kit uses two 1.5" pieces.Link
Replacement Rubber Stopper (Item No. 3010-15) Tygon tubing 5/16" OD X 3/16" ID. Kit uses two 1.5" pieces.Link
| Item No. | Product Description | Unit of Measure | Your Cost | Purchase |
|---|---|---|---|---|
|
Acidity Titratable Tester
3010-11
|
Acidity Titratable Tester | Each |
$323.12
|
|
|
Replacement Buret Unit
3010-12
|
Replacement Buret with Clear Hose | Each |
$226.43
|
|
|
Replacement Flask
3010-14
|
Replacement Flask | Each |
$127.64
|
|
|
Replacement Tygon® Tubing Per foot
3010-13
|
Replacement Clear Tygon® Tubing Per foot | 1 Foot |
$2.73
|
|
|
Replacement Clamp
3010-16
|
Replacement Clamp | Each |
$50.01
|
|
|
Rigid Straight Tubing
3010-02
|
Rigid Straight Tubing: 1/4" OD, for both 3" and 13.5" lengths going thru stopper. | 1 Foot |
$1.09
|
|
|
Stepped Connector
3010-07
|
3/16" X 1/4" Stepped Connector | Each |
$5.40
|
|
|
O rings
3010-17
|
O rings | Each |
$0.28
|